Posted on

Model NO.: 5059/5083/5086/5383
Alloying Ingredient: 5059/5083/5086/5383
Certification: SONCAP, ISO, BV/SGS/CNAS/Ma
Color: to Customized
Trademark: Chalco Aluminum
Transport Package: Export Standard Wooden Pallet or as Your Requsts
Specification: According to Customer Requirement
Origin: Henan China
HS Code: 7604210000
Model NO.: 5059/5083/5086/5383
Alloying Ingredient: 5059/5083/5086/5383
Certification: SONCAP, ISO, BV/SGS/CNAS/Ma
Color: to Customized
Trademark: Chalco Aluminum
Transport Package: Export Standard Wooden Pallet or as Your Requsts
Specification: According to Customer Requirement
Origin: Henan China
HS Code: 7604210000
Marine Grade Extruded Aluminum T Bar  

Marine Grade Extruded Aluminum T Bar

5083 and 5086 are non heat treatable alloys. The mechanical properties of the alloy depend on the chemical composition of the alloy and the hot rolling temperature. The supply status of marine 5083 and 5086 alloy is O, H111 and H112. Among them, the latter is resistant to stress corrosion, and can prevent the tropical climate from intergranular corrosion cracking.

6061 and 6082 aluminum alloys are widely used as light structural materials and widely used in transportation materials. 6061 and 6082 alloy extrusion products need any double base heat treatment for age hardening. The working procedure is as follows:  heating billet, extrusion, profile quenching, solid solution treatment, straightening, aging in furnace. Only by strictly controlling the technological parameters of each process can a satisfactory mechanical performance be achieved.

Marine aluminum alloy profiles are generally used on three types of structures:

First, the main force structure with the strength as the main factor, mainly includes the hull structure and superstructure.

Different types of ships with different ship structure, ship structure generally include bottom plate, bottom plate, side plates, sheer strake, bulwark, deck, bulkhead, coaming, ribs, elbow plate, longitudinal beams, ribs, keel, reinforcement, pillar and pole.

The upper atmosphere structure forecastle, bridge and poop. The upper body as the cabin and placement of some ship equipment with the cab, studio, the crew and passengers of the living room and life. The upper structure includes frame, beam, door board, ceiling, partitions, fences and other special angle aluminum profile.

Seond,, that is, not force construction or force less components. For example, all kinds of fittings (anchor, mast, chimney, ladder, line and circuit device), oil tank, water tank, watertight doors, windows, cover, sanitary equipment, piping, ventilation, windshield, bracket, streamlined shell, handle, handrail, cylinder, piston, base, sling device and furniture etc. etc..



Third.  The thrid structures refer to decorative and insulated components. The aluminum can color anodized,  and the color anodized aluminum is used as an ornament, which is beautiful, economical and practical.

Marine Aluminum T Bar Specification:
Alloy:  5083, 5086, 5383, 5059, 6061, 6082,6005A
Temper: H111/H112, T5/T6
Certificate: BV /DNV /ABS/Lioyds
Thickness: 3mm---50mm
 
Marine Aluminum T Bar Aluminum Alloys Composition
Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Ga Others Alu
Each Toal  
5083 0.40 0.40 0.1 0.4-1.0 4.0--4.9 0.05--0.25 -- 0.25 0.15 -- 0.05 0.15 Remainder
5383 0.25 0.25 0.20 0.7-1.0 4.0-5.2 0.25 -- 0.40 0.15 -- 0.05 0.15 Remainder
5086 0.40 0.50 0.1 0.2--0.7 3.5-4.5 0.05-0.25 - 0.25 0.15 - 0.05 0.15 Remainder
5059 0.45 0.50 0.25 0.6-1.2 5.0-6.0 0.25 - 0.40-0.9 0.20 - 0.05 0.15 Remainder
6061 0.4-0.8 0.7 0.15-0.40 0.15 0.8-1.2 0.04-0.35 - 0.25 0.15 - 0.05 0.15 Remainder
6005A 0.50-0.9 0.35 0.30 0.50 0.40-0.7 0.30 - 0.20 0.10 - 0.05 0.15 Remainder
6082 0.7-1.3 0.5 0.1 0.4-1.0 0.6-1.2 0.25 - 0.20 0.10 - 0.05 0.15 Remainder
Mechanical Properties of Marine Aluminum T Bar
Alloy Form Thickness(mm) Temper Rm Rp0.2
(Mpa)		 A% Min
Min.   Aso A
5086 Shapes, Bar, Tube 3≤t≤50 H112 240 95 10 12
5083 Shapes, Bar, Tube Shapes, Bar, Tube 3≤t≤50 3≤t≤50 H111
O and H112		 270  270 110     125 10    10 12     12
5059 Shapes, Bar, Tube 3≤t≤50 H112 330 200   10
5383 Shapes, Bar, Tub 3≤t≤50 O 290 145 17 17
Shapes, Bar, Tub 3≤t≤50 H112 310 190   13
6061 Shapes, Bar, Tube Profiles 3≤t≤50 3≤t≤50 T5 or T6
T5 or T6		 260   245 240    205 10 8       4
6005A Shapes, Bar, Tube Profiles 3≤t≤50 T5 260 215 9 8
Shapes, Bar, Tube Profiles 3≤t≤10 T6 260 215 8 6
10≤t≤50 250 200 8 6
6082 Shapes, Bar, Tube Closed shapes 3≤t≤50 3≤t≤50 T5 or T6
T5 or T6		 310     290 260    240 10 8       5



Marine Aluminum T Bar Mould List:
 
Material Code A(mm) B(mm) T1(mm) T2(mm) R G (Kg/m)
CAM-513 20 12.8 0.8 0.8   0.069
CAM_A001407 20 20 2 2   0.205
TP-680 22 9 2 2   0.157
CAM_A000935 22.5 48 2.5 2.5 0.5 0.454
TP-59 25 25 1 1   0.132
CAM_A000973 25 25 2 2   0.259
CAM_A000801 25 25 3 3   0.381
TP-170 25 25 3 3   0.381
TP-171 25 40 3 3   0.502
TP-21 25.4 31.75 0.9 0.9 0.5 0.137
CAM_A000228 30 30 3 3   0.462
CAM_D005016 33.78 23.88 1.52 2.03   0.261
CAM_A000774 35 35 3 3   0.543
ALD_D001980 40 20 1.6 1.6   0.252
ALD_D003711 40 25 1.6 1.6   0.274
ALD_D001143 40 40 1.6 1.6   0.339
CAM_A000520 40 40 3 3   0.624
CAM_A000521 40 40 4 4   0.821
ALD_D001862 40 40 6 6   1.199
CAM_D007940 41.28 30.15 1.57 2.29   0.351
ALD_D000071 45 100 8 5 4 2.233
ALD_D003206 45 100 8 4 4 1.984
CAM_A000425 50 50 3 3   0.786
Cup Brushes

The cup brushes remove rust, paint, dust and burrs from surfaces such as metals and wood, and can also be used to level weld spatter. Wire grinder brush for drill can be used for surface adhesion treatment before painting, spray coating and electroplating. It can also be used for surface paint peeling and grinding.Behappy cup brushes are used to remove adhesive residues, hard lime, rust, paint and excess rubber

B159_1

Cup Brushes,Wire Brus,Steel Wire Brush,Polishing Brush

Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com