Aluminum Precision Turned Parts 1. The hardness of the material is moderate, and the tool wear of the machining equipment and CNC machining center is small. Aluminum Precision Turned Parts,Aluminum Cnc Turning Parts,Aluminium Cnc Turning,Cnc Turning Aluminum Parts Stand Dragon Industrial Co., Ltd. , https://www.standdragontw.com
2. It can be precisely machined into various geometric shapes such as plane, cavity, shell, sphere, arc, and anisotropy.
3. It is not easy to stain and maintain. Aluminum precision parts, precision parts processing, CNC processing
4. It has good durability and is not easy to corrode. With special treatment process, the service life of parts is longer.
5. Aluminum is environmentally friendly and can be 100% recycled, with high recycling value.
The above five points are the material characteristics of aluminum products. Aluminum is a common material in CNC precision parts processing, with moderate hardness, durability and corrosion resistance. In addition, the cost of materials is appropriate. It is the preferred material for most parts manufacturers.
Submersible motor overload motor fever reasons: 1, friction between the impeller and the pump, impeller is too large. 2, the liquid density problem, the density is too large or mud will lead to overloading motor overload, the measured medium density is greater than 1.3, or even reach 1.5 ~ 1.6; and motor power richness coefficient is small (usually 1.05 ~ 1.2). 3, the impeller blockage in the pump body, the silt deposition in the pump body, the impeller is caused by braking overload. 4, the rotor shaft hole clearance and the gap of the impeller mouth ring was sand filled rotor shaft overload caused by braking. 5, motor power than the actual small, individual manufacturers to reduce the motor power. 6, did not strictly follow the international ISO 9906 or the current domestic standards of manufacturing.