Secondly, after the 3D curve is drawn and refined by the curve modification function, after confirming, use the surface function to draw each surface on the image, and select the “stake out surface†command to draw the surface, as shown in the “green†surface shown in Figure 11b. Part, then use the analysis function and modification function of the surface to perfect the drawing surface, and then analogy to complete the surface drawing work, as shown in Figure 12a. (a) (b) Figure 12 Finally, the various surfaces are integrated, and the "generating entity" command is used to implement the surface entity blending model; the Boolean operation "entity merge, entity intersection, entity cut" command is used to realize the association of features, and then the radius of the entity is rounded. Angle, solid shelling, chamfering and other commands are used to trim the model. The "mirror" entity is added according to the designed model. The design process from image to 3D model is completed. The result is shown in Figure 12b. 2. Formation of multiple design options Throughout the enterprise product design process, we can conclude that the design of new products must be multiple. Similarly, for the above-mentioned product design of the car mirror, software can be used to form a variety of design solutions: [Scheme 1] Design the mirror part of the mirror; select the "Advanced GSM" command in Global Deformation Modeling (GSM), select the entire model in the command menu dialog bar, and determine that the tail curve of the mirror is fixed. Then select the curve of the frame side as the initial curve, then select the curve shown in Figure 13a as the target curve, then select "OK", the new design is formed, as shown in Figure 13b. Previous page next page Air Conditioning Connecting Pipe Air Conditioning Connecting Tube,Copper Connecting Pipe,Aluminium Copper Connecting Pipe for HVAC Suzhou Green New Material Technology Co., Ltd. , https://www.glooptube.com
