Glass fiber reinforced plastic is a composite material with various varieties, different properties and wide application. It is a functional new material made from a composite process of synthetic resin and glass fiber. In general, most of the glass fiber reinforced materials are used in structural parts of the product, and are structural engineering materials; for example: PP, aBS, Pa66, Pa6, PC, POM, PPO, PET, PBT, PPS. Characteristics of glass fiber reinforced plastic (1) Good corrosion resistance: FRP is a good corrosion-resistant material. It has good resistance to the atmosphere; water and general concentration of acid and alkali; salt and various oils and solvents. It has been widely used in chemical anti-corrosion. Every aspect of it. Is replacing carbon steel; stainless steel; wood; non-ferrous metals and other materials. (2) Light weight and high strength: The relative density of FRP is between 1.5 and 2.0, only 1/4~1/5 of carbon steel, but the tensile strength is close to or even exceeds that of carbon steel, and the strength can be compared with high-grade alloy steel. It is widely used in aerospace; high pressure vessels and other products that need to reduce their own weight. (3) Good electrical performance: FRP is an excellent insulating material for the manufacture of insulators, which can still be maintained at high frequencies. (5) Good designability: materials can be selected according to requirements to meet product performance and structure requirements. . Dielectric, microwave permeability is good, widely used in radar radome; microwave communication and other industries. (4) Good thermal performance: FRP conductivity is low, and it is 1.25~1.67KJ at room temperature. Only 1/100~1/1000 of metal is an excellent thermal insulation material. It is an ideal thermal protection and ablation resistant material in the case of ultra-high heat in an instant. (5) Excellent process performance: the molding process can be selected according to the shape of the product and the process can be molded at one time. (6) Good designability: The material can be fully selected according to the requirements to meet the performance and structure requirements of the product. (7) Low modulus of elasticity: The modulus of elasticity of FRP is twice as large as that of wood but 10 times smaller than that of steel. Therefore, in the product structure, rigidity is often insufficient and deformation is easy. The solution can be made into a thin shell structure; the sandwich structure can also be compensated by high modulus fibers or ribs. (8) Poor long-term temperature resistance: Generally, FRP cannot be used for a long time at high temperature, and the FRP of general-purpose polyester resin will decrease significantly at 50 degrees or more. (9) Aging phenomenon: It is easy to cause performance degradation under the action of ultraviolet light, sand, rain, snow, chemical medium and mechanical stress. (10) Low interlaminar shear strength: Interlaminar shear strength is borne by resin and is therefore low. The adhesion between the layers can be improved by selecting a process, using a coupling agent, etc., and avoiding shearing between layers during product design. Glass fiber reinforced plastic advantages 1. The heat-resistant temperature of glass fiber reinforced plastic is much higher than that without glass fiber, especially nylon plastic. 2. Glass fiber reinforced plastic has low shrinkage and high rigidity. 3, glass fiber reinforced plastic will not stress cracking, at the same time, glass reinforced plastic plastic impact performance is improved a lot 4, glass fiber reinforced plastics have high strength, such as: tensile strength, compressive strength, bending strength, are very high. 5, glass fiber reinforced plastics due to the addition of other additives, the glass fiber reinforced plastics have a much lower combustion performance, most of the materials can not ignite, is a flame retardant material Shortcomings of glass fiber reinforced plastic 1. Glass fiber reinforced plastics are made opaque due to the addition of glass fiber, and are transparent before adding glass fiber. 2. Plastic glass fiber reinforced plastic has lower toughness and increased brittleness than glass fiber without glass fiber added. 3. Plastic glass fiber reinforced plastics Due to the addition of glass fiber, the melt viscosity of all materials increases, the fluidity deteriorates, and the injection pressure is much higher than that without glass fiber. For normal injection molding, the injection temperature of all reinforced plastics is higher than that of plastics. Increase 10 ° C - 30 ° C before adding glass fiber. 5. Due to the addition of glass fiber and additives, the hygroscopic property of glass fiber reinforced plastics is greatly enhanced. The original pure plastics will not absorb water, so they must be dried during injection molding. 6. Glass fiber reinforced plastic In the injection molding process, the glass fiber can enter the surface of the plastic product, making the surface of the product become rough and spotted. In order to achieve a higher surface quality, it is preferable to use a mold temperature machine to heat the mold during injection molding, so that the plastic polymer enters the surface of the product, but the appearance quality of the pure plastic cannot be achieved. 7. After the glass fiber is reinforced, the glass fiber is a material with high hardness. After the high temperature volatilization of the auxiliary agent, it is a highly corrosive gas, and the screw and the injection mold of the injection molding machine are worn and corroded greatly. Therefore, the production uses such a type. When using the material mold and injection molding machine, pay attention to the surface anti-corrosion treatment and surface hardness treatment of the equipment. Heavily Hot-Dip Galvanized Wire
Heavily Hot dipped Galvanized Wire
Zinc: 200-350g/m2
T/S: 380-500Mpa
Packing: plastic film inside, hessian woven bag or nylon woven outside
Shen Zhou City Hongda Hardware Products Co.,Ltd is a family owned
company, founded in 1998, loacated at Tang feng industry zone, Shen
Zhou. It has covered an area of 20 hectares, with a total asset of 20
million and more than 300 people with 80 engineering technicians, a
5-person research group, and a service group dedicated to provide the
best solutions.
Heavily Hot-Dip Galvanized Wire,Heavily Galvanized Wire,Heavily Hot Dipped Wire,Woven Mesh Gabions Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.hdpvcwire.com