Zonglan Hand Tools for eyelets consist of piercing and attaching hand toolsets. Eyelet Dies,Grommet Machine Dies,Eyelet Flaring Die,Eyelet Press Dies NINGBO ZONGLAN MECHANICAL AND ELECTRICAL EQUIPMENT MANUFACTURE CO., LTD , https://www.zonglaneyelet.com
This manual set is designed to be used with a hide face mallet. It is good for piercing material and attaching curtain eyelets afterward. Not all hand tools are the same and it is not easy to find such a highly qualified hand tool for attaching curtain eyelets in today`s world.
Though these tools are designed for low-volume eyelet application projects, Zonglan Hand Tools are professionally designed and produced with advanced technology for decades of problem-free use. Zonglan Hand Tools are made of Stainless Steel to increase their resistance to oxidation. Their surface is specially treated for metal hardening for stronger durability against harsh hammer usage.
Zonglan Hand Tools are designed in such a manner affording the use of minimum force with maximum comfort. In addition, thanks to its precision, the eyelet application quality of Zonglan Hand Tools is far better than the application quality of its ordinary competitors.
Our hand tools sets are available for 6mm,10mm and 12mm Easy Apply Zonglan eyelets and are suitable to attach them onto various substrates, including tarpaulin, drapery and home textile.
Pumps and pipelines in the use of a period of time, should be done to maintain the pump, because the pump maintenance work is not done well, will shorten the life of the pump. Then the pump maintenance work to pay attention to what? Pump (1) to drain the pump and the water inside the pipe. (2) If the disassembly is convenient, the pump and pipeline can be removed and cleaned. (3) Check the ball bearings, such as jacket wear, Kuang, ball wear or the surface of the spots have to be replaced. Can still be used to clean the bearings with gasoline or kerosene butter preserved. (4) Inspect the impeller for any cracks or small holes, and if the impeller is loose, repair or replace if damaged. Check the impeller wear ring gap, if more than the specified value, should be repaired or replaced. (5) If both the pump and the pipe are not to be disassembled, cover the exit with a cover to prevent debris from entering. (6) When the transmission tape is not used, the tape should be removed, washed with warm water, dried and stored in the place without direct sunlight, nor stored in places with oil, corrosives and smoke. In any case, do not allow the tape to be stained with oil, diesel or gasoline, and do not apply rosin and other sticky substances to the tape. Before use, remove the white powder from the contact surface of the tape. (7) Scrub all screws and bolts with steel wire brush, apply oil or dip in diesel oil. Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)