Fuonce Lighting , https://www.fuonce.com
1. First, we must check whether there is blockage in the middle. To ensure that the wireless bridge signal can be transmitted stably, we try to ensure that there is no blockage between the transmitter and the receiver.
2. To adjust the direction of the wireless bridge, both horizontal and vertical antenna angles must be within its range;
3, the above two items are no problem, we must go through the software to see the signal strength and CCQ signal connection quality, the signal connection quality must be in the -40 - 75 is the best, and CCQ must be 80 or more. If the CCQ is not normal, we can scan around to see if there is a device with the same frequency by scanning nearby frequencies, if there is a fix, although the frequency avoids the interference;
4. If your transmission distance is within the range of our equipment's transmission distance, if you exceed it too much, you can enhance the signal by increasing the transmission power or by increasing the antenna gain.
If the above method does not solve the problem, please call Shenzhen Leian technology and technical personnel telephone!
With the continuous development of digital technology, analog cameras are also being replaced by digital cameras in the security industry. The development of digital cameras has brought wireless bridge monitoring devices to the front line of the market. Because the wireless bridge has the advantages of small delay, good stability, clear image, flexible application, and strong expansibility, the use of wireless bridges in various industries is also increasing. However, the use and debugging of wireless bridges is the biggest problem. When you install a wireless bridge, you often encounter it. The wireless bridge receives bad signals. What should we do at this time? How to debug? Shenzhen Leian Technology Xiaobian gives you a brief introduction: