Electric hand drill is a drilling Tool powered by AC power or DC battery. It is a kind of hand-held electric tools.
Electric Hand Drill,Customization Power Tools,Electric Tools Set,Power Tools Set Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com
1 Features
It uses PVC as a raw material and has been processed into a high-quality profile. It has the characteristics of light weight, easy installation, waterproof and moisture proof, and prevention of worms. It also has a lot of changes in the color pattern on the surface, and it is also resistant to pollution, good cleaning, sound insulation, and insulation. The good performance of heat, especially in the new process, has added flame-retardant materials so that it can be extinguished from the fire and is safer to use. It has a low cost and a good decorative effect. Therefore, it occupies an important position in the home decoration ceiling materials and becomes the leading material for ceilings of bathrooms, kitchens, toilets, balconies and so on.
2 quality assessment
When purchasing the PVC ceiling profile, it is necessary to ask the dealer for a quality inspection report and a product inspection certificate. Visual appearance quality The surface of the board should be smooth, no cracks, no bumps, and it can be assembled and disassembled freely. The surface is turbulent without scratches; In the inspection test report, the product performance indicators should meet: heat shrinkage rate is less than 0.3%, oxygen index is greater than 35%, softening temperature is above Celsius degree, flash point is above 3000 degrees Celsius, water absorption rate is less than 15%, moisture absorption rate is less than 4%.
3 installation
First, the elevation line should be popped up on the wall, the pressure lines should be fixed at both ends of the wall, and the concrete nail should be firmly fixed with the wall. The plate is cut to the actual size of the ceiling. The plate is inserted into the battens. The slats are raised outwards. After the installation is straightened, the nails are fixed with nails. Then the second plate is inserted. The last plate should be cut according to the actual size. Use a sharp knife when cutting, press the elastic wire with a steel rule to cut it, insert it into the upper plate with a slight bend, insert the seal on both sides after loading.
4Maintenance and replacement
Plastic ceiling profiles are very resistant to water and scrubbing. After daily use, the cleaning agent can be used to scrub and rinse with clean water; the plate gaps are vulnerable to oil stains; after cleaning, the brush can be used to wash the detergent and rinse with clean water; pay attention to the lighting circuit and do not touch the water. If the plastic ceiling profile is damaged, it is very convenient to update it. As long as one end of the bead is removed, the plate is removed from the bead piece by piece, and the damaged plate is replaced with a new plate and then reinstalled, and the pressing bar can be pressed. When replacing, it should be noted that the color of the new board and the old board should be the same, and there should be no color difference.
Hand electric drill is the largest sales of power tools industry products, widely used in construction, decoration, furniture and other industries, used in the object on the opening or piercing objects, some industries are also known as electric hammer.
The main components of the hand electric drill: drill chuck, output shaft, gear, rotor, stator, housing, switch and cable.
Electric hand drill (pistol drill) - used for drilling metal materials, wood, plastic, etc. When equipped with a positive and negative switch and electronic speed regulating device, it can be used as an electric screwdriver. Some models are equipped with rechargeable batteries, which can work normally without external power supply for a certain period of time.
Plastic steel plate