White oak: White oak is produced in large quantities in the eastern United States. Its color and appearance are similar to those of European oak. Its sapwood is light, its heartwood is light brown to dark brown, and its texture is rough. Most of it is straight, and the pith ray is longer than red oak. More wood grain than red oak, hard and heavy wood, good machinability, dyeing and polishing performance. Because of its beautiful wood grain and wood pulp rays, white oak is more suitable for varnish treatment than red rubber. Wood rubber has strong anti-corrosion and anti-pathogenic ability, so it rarely sees white oak material decay and wormhole. Photo: American White Oak Logs advantage: The texture is firm, the hand feels delicate and comfortable; the texture is smooth and the color is warm and elegant. The profile has higher mechanical strength, firm structure, durability and no deformation. Disadvantages: The drying is slow, the shrinkage rate is relatively large when dry, and the performance is easy to change. Not conducive to dry sawing and cutting. Expensive. The main purpose: Building materials, furniture, flooring, interior architectural design, outdoor joinery, mouldings, doors, cabinets, paneling, sleepers, wooden bridges, wooden barrels, wooden blocks, etc. Red Oak: Red oak is widely distributed in various parts of the eastern United States. Oak is the tree with the largest number of species in the eastern hardwood forest. The number of red oaks is more than that of white oak. There are many varieties of red oak, and about eight of them are commercial trees. The appearance of red oak is usually similar to that of white oak, but the wood pulp is thinner and less visible. Most of the red oak is straight and has a rough texture. The red oak tree has its name because the leaves turn red in the fall. Photo: American Red Oak Logs Processing performance: Red oak has good mechanical processing performance; although it is recommended to drill first, its nail and screw fixing performance is good; good surface can be obtained after dyeing and polishing; slow drying and easy cracking and warping; large shrinkage and easy change of properties. Physical properties: Red oak is hard and heavy, has medium flexural strength and rigidity, high breaking strength and excellent resistance to steam bending. Southern red oak grows faster than northern red oak, and the wood is harder and heavier. Durability: It was assessed that the heartwood was slightly resistant to corrosion. Preservative treatment is moderately difficult. The main purpose: Building materials, furniture, flooring, interior architectural design, interior joinery and lace, doors, kitchen cabinets, paneling, etc. The difference between red oak and white oak: 1. The red oak pulp ray is thinner than the white rubber, and there are fewer pictures; 2. Red oak white wood is white to light brown, heartwood pink brown. White oak has a sapwood of light color, and the heartwood is light brown to dark brown; 3. White oak grain and wood pulp rays are very beautiful, so white oak is more suitable for varnish treatment than red oak; 4. White oak heartwood has stronger corrosion resistance than red rubber, and its ability to prevent insects is better than red oak. (Editor: Huang Junfeng) Concealed Basin Faucet,Gold Basin Faucet,Faucet Brass Tap,Corner Sink Faucet Heshan Jasupi Sanitary Ware , https://www.jasupifaucets.com
