At this stage, it is a revolutionary stage of steel-wood doors. Although the solid wood composite doors and PVC plastic doors in the interior door industry are grabbing a large number of steel-wood doors, the demand for steel-wood doors will increase significantly in the next three to five years. The steel-wood doors in steel-wood doors are more recognized by consumers than the lacquered steel doors. Although the price of painted steel doors is more suitable for consumers, the mature technology of coated steel doors is better than that of painted steel doors. What is the difference between the two? Plastic-coated steel doors need to introduce advanced production equipment, unique technology and sophisticated technology. The plastic coated steel plate is degreased, derusted and phosphatized by chemicals, and then treated with anti-rust paint. Tens of tons of pressure molded into different flower-shaped door panels, the three-dimensional feeling is strong, because the molding is required, the quality requirements of the steel plate are very high. The required material is required to use a 0.6cm plate (the actual plate thickness is about 0.57cm), and the steel plate is a cold-rolled plate, otherwise the phenomenon of compression and compression will occur. PVC is plastic wood, with clear grain pattern, realistic facade, smooth and delicate hand, strong and durable products, and more elegant and domineering solid wood doors. The transfer spray (painted) door leaf does not require dozens of tons of pressure molding, using 0.4cm material or 0.5cm material, and some are less than 0.4cm. It is very thick after spraying paint, and does not need to be sucked by PVC. Plastic. When it is used for a long time, the problem of fading and falling off of the paint may occur, but the color of the pre-formed steel-wood door is novel and lustrous. The lacquered steel wooden doors are mostly selected for rolling and pressing, and the hot-rolled sheets are manually cleaned after cutting the steel sheets, which are not clean and easy to fall off. Steel wood door leaf structure Molded steel plate (0.6cm thick plastic coated and 0.4cm thick painted lacquered board) + wooden side (also known as inner ribs: there are fir finger joints and other materials) + honeycomb paper (sound insulation effect). Yilun Steel Door pays attention to quality, self-made plastic coated steel plate, free of paint, environmental protection and health; honeycomb paper in the middle of door leaf adopts 15mm small aperture, thick paper core (weight 1.1kg/bar), bonded steel plate, fir finger joint, honeycomb paper It is a green and environmentally-friendly foaming glue that does not contain formaldehyde, so the product is firm and non-deformable, and the sound insulation effect is good. The door leaf plate is exclusively bent by up, down, left and right, and the door leaf is more than five times more resistant to cracking and cracking. There are hundreds of large and small steel door manufacturers in the country. Only a few manufacturers use two bends on the left and the right. Others use only one bend process. Its door leaf is surrounded by steel plates, and there are only a few manufacturers of this kind of craft; there are more than 50 kinds of door leaf patterns, which are rich and complete. Concerned about surprises Tag: steel wood paint plastic steel honeycomb paper compression molding Previous: Analysis of acid-base resistance of stainless steel deep well pump Next: What kind of parts are suitable for electrochemical deburring machine Split Case Pump,Horizontal Split Case Pump,Vertical Split Case Pump,Double Suction Split Case Pump Zhengzhou Shenlong Pump Industry CO.,Ltd , https://www.waterpump-manufacturer.com