Floor construction points and frequently asked questions

Many problems with the floor are actually related to the construction of the floor. Therefore, it is very necessary to understand the construction points of the floor. Here we look at the relevant knowledge!

First, the construction points

1. The ground is dry and flat;

2. The solid wood floor and the bamboo floor should be used to play the keel before paving. The keel should be kept dry and the moisture-proof pad should be kept. There must be enough expansion joints between the floor and the wall. Before the laminate flooring is installed, the moisture-proof pad, floor and wall should be laid. There must be enough expansion joints between the floor and the floor to glue (the lock floor is not glued).

Second, analysis of common problems

Flooring is the most prone to problems in decorative materials, and it is also the product most complained by consumers, especially solid wood flooring.

Because solid wood flooring is a natural material, it is easy to change with changes in temperature and humidity in the air, so it is the focus of complaints.

For such problems, businesses need to strictly control the product introduction, installation process and other aspects.

1. The temperature is too high to make the floor moisture dry, there are cracks; humidity is too large, the floor expansion occurs from the drum phenomenon;

2. Chromatic aberration problem. It is a normal phenomenon. Due to the differences in the trees and batches, the floor of the same tree species will have different degrees of color difference.

Bamboo flooring construction points:

1) The amount of good size, reasonable materials. All truncated plates. The section must be sealed with varnish to prevent moisture.

2) When the bamboo flooring is laid, the fir bar (1.2 x 1.2 cm) is placed at the base of the wall and the pavement begins vertically. Bamboo flooring can be laid directly on the keel, and it is more scientific to install bamboo flooring after plywood is placed on the keel. The first piece of bamboo flooring has a grooved surface that tightly binds the cedar bar. Then press the convex and concave surface in order to close the tightness. A short board that is cut off according to the length of the room is laid at the root of the transverse wall. Bamboo flooring is laid crosswise.

3) After the bamboo flooring is completely installed, take out the fir boards at the roots of the surrounding walls.

4) Use an entire sheet of floor seal around the wall base to cover the expansion joints. Use wooden screws or bamboo sticks to attach the corner panel to the wall. Wood screws or bamboo sticks can be painted with near-color paint (or varnish). Finally, the plane on the angle plate is decorated with a large thickness line.

5) The bamboo floor should not be too tight to prevent extrusion; The contact between the back of the bamboo floor and the ground must not be glued; the installation quality will directly affect the overall effect of the floor, I hope the experienced woodworking construction.

Nature floor del floor paint decoration room