In the decoration of the villa, we often encounter the stairs. The decoration of the stairs directly affects the overall decoration effect. There are many kinds of materials on the staircase floor. More people will choose to install wood flooring. This will not only be effective, but also Durable and gentle. Next, let's take a look at how the paving of the staircase floor can be aesthetically pleasing, and where the staircase laying floor requires attention. How to spread the staircase floor : 1. The choice of paving wood floors on the stairs is better than paving the tiles, and the wooden floor has much room for modification. Compared to exposed concrete stairs, it is soft, so more people will choose to reinforce, compound or solid wood materials. paste. 2, the material is ready, the first step is to lay the stairs, is to level the ground, it is recommended to measure the smoothness of the stairs, if the error per meter more than 3mm will need to level, it is recommended to find a professional master to operate. 3, if the stairs can be installed after the leveling of the ground, pay attention to the installation of the order, it is recommended to install from the bottom up, so that it is both handy and can check along the staircase floor compression and standardization. 4. When installing a flat floor on a stair, you often encounter situations where the floor is cut and assembled. If the measured line is not standardized during cutting, the stitching seam is too large. In the cutting of the floor, inaccurate cutting by the workers can also lead to significant differences in the floor after the installation of the stairs and unsightlyness. Stairs laying flooring need to pay attention to : 1, floor board surface problem The first level of the stairs is the facade. When the floor is installed, the expansion and contraction rate of the floor should be taken into account. Therefore, sufficient space should be reserved for the interface between the facade and the floor. After the façade floor is stuck on the ground floor, the next step installation of the stair floor can be performed. 2, the problem of floor size In the installation of a flat floor, it is necessary to measure the horizontal height to ensure the standard of measuring lines and cutting and cutting. The gap between the facade and the plane can not exceed 0.5mm, the gap between the facade or plane and the wall, skirting board can not exceed 1mm, the seam between the floor and the floor surface, such as the crack of the reinforced floor can not exceed 0.2mm, solid wood floor The gap cannot exceed 0.5mm. Summary of the article: The above is for everyone to introduce how the staircase floor and the laying of the stairs need to pay attention to what the relevant content of the place, I believe we read the article after the stairs have a certain understanding of the paving, floor coverings related to damage, staircase floor Need to need to splicing in many places, many people think that the loss rate is relatively large. In fact, the pavement loss rate of the staircase floor is determined by the matching of the stairs and the floor. If you need to learn more about the later stage, please pay attention to this site information. Gate Latch,Gate Latch Hardware,Gate Lock Latch,Double Gate Latch Jiaxing Gates Hardware Products Co.,Ltd , https://www.jxgateshardware.com
