In the past, wheel bearings for passenger cars were mostly used in pairs with single row tapered rollers or ball bearings. With the development of technology, sedans have widely used sedan wheel hub units. The range of use of hub bearing units is growing day by day and is now in its third generation: the first generation consists of double row angular contact bearings. The second generation has a flange on the outer raceway for holding the bearings in place, which can be simply sleeved to the axle and fixed with a nut. It makes it easy to repair the car. The third-generation hub bearing unit is matched with the ABS anti-lock brake system. The hub unit is designed to have an inner flange, the inner flange is bolted to the drive shaft, and the outer flange mounts the entire bearing together. Worn or damaged hub bearings or hub units can cause undesirable and costly failures of your vehicle on the road, or even harm your safety.
1. Equipment operation: The metallurgical industry uses a large number of rotating equipment, such as rolling mills, ovens, cooling equipment, etc., and the normal operation of these equipment is inseparable from the support and guarantee of bearings. Bearings can reduce the friction and wear of equipment, improve the reliability and operation efficiency of equipment. Automotive Tapered Bearings,Waterproof Bearings,Smooth Bearing,Impact-Resistant Bearings Hebei Fangqiang bearing manufacturing Co., LTD , https://www.fangqiangbearing.com
Competitive quality, service and price; Long time exportation experience with over 30 countries for aluminum rod and billets
We are one of the largest aluminum producer in China, and we also use of aluminum rod, billets, rod, foils, sheet, circles, embossed coil etc.
We have produced aluminum rod over 10 years, and we have good reputation of the price and quality in North part of China.
Alloy: 1050, 1060, 1070, 1350, 3003, 6101, 6201, 8030
Diameter: 9.5mm, 12mm, 15mm,
Coil weight: 5 tons
Lead time: 25 days
Packing: With plastic film packing out side, strong see worthy packing with steel belt
Specially for the differnt usage, with competitive price and quality.
We are now supply to Italy, USA, MEXICO, YEMEN, SYRIA and Brazil market, could be used for the electricity industry, powerstation Industry, decoration and other industry usage.
Welcome to vist our factory to test the quality, service and reputation
Apply to
1. Arcaft, transport vehicles, vessels, instruments, metal products
2. Processing to the rivets, zipper.nails,etc
3.Welding Aluminu Magnesium alloy wire which magnesium content is exceeding3%
4.Sanitary equipment hose braiding materials, automotive and machinery oil hose material
5.Electronic industries and telecommunications industries
6.Textile shield for power cable
Type Tensile Strength,N/mm²
 Fracture Toughness%,Min
 Electrical Resistance Ωmm²/m 20,Max
 A
 60-80
 25
 0.02755
 A2
 80-110
 12
 0.02785
 A4
 95-115
 10
 0.02801
 A6
 110-130
 8
 0.02801
 A8
 120-150
 6
 0.02801
Competitive quality, service and price; Long time exportation experience with over 30 countries for aluminum rod and billets
We are one of the largest aluminum producer in China, and we also use of aluminum rod, billets, rod, foils, sheet, circles, embossed coil etc.
We have produced aluminum rod over 10 years, and we have good reputation of the price and quality in North part of China.
Alloy: 1050, 1060, 1070, 1350, 3003, 6101, 6201, 8030
Diameter: 9.5mm, 12mm, 15mm,
Coil weight: 5 tons
Lead time: 25 days
Packing: With plastic film packing out side, strong see worthy packing with steel belt
Specially for the differnt usage, with competitive price and quality.
We are now supply to Italy, USA, MEXICO, YEMEN, SYRIA and Brazil market, could be used for the electricity industry, powerstation Industry, decoration and other industry usage.
Welcome to vist our factory to test the quality, service and reputation
Apply to
1. Arcaft, transport vehicles, vessels, instruments, metal products
2. Processing to the rivets, zipper.nails,etc
3.Welding Aluminu Magnesium alloy wire which magnesium content is exceeding3%
4.Sanitary equipment hose braiding materials, automotive and machinery oil hose material
5.Electronic industries and telecommunications industries
6.Textile shield for power cable
Type Tensile Strength,N/mm²
 Fracture Toughness%,Min
 Electrical Resistance Ωmm²/m 20,Max
 A
 60-80
 25
 0.02755
 A2
 80-110
 12
 0.02785
 A4
 95-115
 10
 0.02801
 A6
 110-130
 8
 0.02801
 A8
 120-150
 6
 0.02801
2. Load bearing: The equipment in the metallurgical industry usually needs to bear heavy loads, and the bearings can bear and distribute these loads to ensure the stable operation of the equipment. For example, in the rolling process, bearings are subjected to high temperatures, high speeds and large loads, which can ensure the normal operation of the rolling mill.
Model NO.: 9.5mm-12mm
Ultimate Strength (≥ MPa): 85
Elongation (≥ %): 8
Conductivity: 61.5
Wire Gauge: 2.5mm
Shape: Round
Technique: Extruded
Alloy: Non-alloy
Certification: EN, ASTMB, ASTM, JIS, GB/T
Trademark: Sino East
Specification: Diameter: 9.5mm, 12mm, 15mm
Origin: Tianjin China
HS Code: 7306309000
Model NO.: 9.5mm-12mm
Ultimate Strength (≥ MPa): 85
Elongation (≥ %): 8
Conductivity: 61.5
Wire Gauge: 2.5mm
Shape: Round
Technique: Extruded
Alloy: Non-alloy
Certification: EN, ASTMB, ASTM, JIS, GB/T
Trademark: Sino East
Specification: Diameter: 9.5mm, 12mm, 15mm
Origin: Tianjin China
HS Code: 7306309000
Specifications