Gabion Box
Gabion mesh are wire containers made of Hexagonal Wire Netting. Wire diameter varies with the hexagonal netting. According to different surface treatments, gabion mesh can be divided into galvanized and PVC Coated Wire mesh. For galvanized hexagonal wire netting, the wire diameter ranges from 2.0 mm to 4.0 mm. For PVC coated hexagonal wire netting, the outside diameter ranges from 3.0 mm to 4.0 mm. The selvedge wire is one gauge thicker than the mesh wire.
Speaking of the key to the dip coating process, there are too many topics related to the insulation of the oil pump motor. For example, the insulation is the life gate of the motor, the insulation system of the special special motor, the influence of the insulation on the temperature rise of the motor, etc., almost to the point where it is impossible to add. Therefore, it is not difficult to understand that the winding immersion paint is too critical for a motor. Each motor manufacturer will always spend huge sums of money to continuously update the motor immersion equipment.
Some windings have a thick layer of lacquer deposited on the surface, while others look particularly thin, due to manufacturing processes and equipment from various manufacturers.
The total effect of the immersion paint is directly related to the core components of the motor – the reliability of the windings, the impregnating varnish and the immersion lacquering process equipment are the necessary hardware conditions to ensure the advanced level of the motor manufacturing. In order to be able to participate in the discussion of the effect of insulating impregnating varnish and winding dip coating, today Dalan Motor Xiaobian puts out some of his views and opinions to discuss with you.
Insulating dip paint:
Insulating impregnating varnish is one of the main insulating materials of electric motors. It is mainly used for impregnation motor stator and rotor windings, solvent-free paint and solvent paint. The impregnating varnish fills the air gap between the motor stator, the rotor winding and the inner conductor of the iron core slot and the iron core. Since the immersion paint has better thermal conductivity than air, it can effectively reduce the temperature rise of the motor and prolong the service life of the oil pump motor.
Dip drying:
The immersion drying is performed by infiltrating the gap between the motor coils of the impregnated varnish and heating and drying. By dipping the insulating varnish, the motor coils are solidified as a whole, reducing and eliminating mutual movement, improving the overall effect of the hydraulic motor and the ability to withstand moisture and chemical contamination. The performance of the motor is particularly critical and important.
VPI dipping process:
VPI dipping is the abbreviation of VacuumPressure Impregnating in vacuum pressure dipping. The process is divided into two stages: vacuuming and pressure painting. At present, many motor manufacturers adopt VPI dipping process. Through VPI treatment, the paint liquid can be fully infiltrated and the air in the winding can be evacuated, which effectively improves the electrical strength, mechanical properties, thermal conductivity and protection performance of the motor.
Factors affecting the effect of impregnating paint:
(1) Surface requirements of the impregnated parts. The surface of the clean and dry parts is good for the infiltration of the paint. If the impregnated parts are greased and dirty, the surface is not conducive to the infiltration of the paint, and it also causes different degrees of contamination of the impregnated paint. In particular, powdery debris in the core may cause fatal electrical failure of the windings.
(2) Characteristics of the impregnating varnish itself. The wettability of the impregnating varnish is closely related to the quality effect after the component is immersed. If the immersion property of the varnish is excellent, it will ensure that the fine gap is completely filled, otherwise it is necessary to overcome the existence between the liquid and the solid insulating surface by pressure. Inherent repulsive force, which affects the insulation treatment effect. VPI equipment has this capability to achieve the sufficiency of the winding immersion paint.
----- Editor-in-Chief: Dalan Oil Pump Motor 02-Procurement Consultant
Copyright http: / (Dalan Motor) Reprint, please indicate the source
Http://news.chinawj.com.cn
Gabion Box,Black Gabion Box,Electro Galvanized Gabion Box,Hot-Dipped Galvanized Gabion Box
HENGSHUI YUZHENG IMPORT AND EXPORT CO., LTD. , https://www.yzironnails.com