Fraisa's high-speed, high-speed milling products in Switzerland have outstanding performance and performance in different fields such as mold, aerospace and parts processing. Now, Fraisa users can also realize the intelligentization of tools through Fraisa's “tool specialist†cutting software. Application and management. In the application of high-speed milling, the answer can also be found in the “Tool Expert†software. The concept of HPC (High Performance Cutting) is usually used for product processing or rough and semi-finishing of molds, and through high metal removal rate, high processing efficiency is obtained. Fraisa's range of end mills, such as NX-NV, NX-NVD, NX-RNV, and NB-NVD, is the model for high-performance, high-performance end mills. The above series of tools use hardness and toughness equalization bar as the tool raw materials, which ensure the toughness and good life of the tool under large cutting parameters. At the same time, the P coating with the best wear resistance is added, which increases the tool. Life at high cutting speeds. In terms of geometry, select the appropriate rake angle and helix angle for the material being processed and the application. In addition, in the detail design and the edge treatment, the "unequal pitch spiral groove design" respectively reduces the resonance of the tool in the application process of high-efficiency milling and large depth of cut, thereby ensuring the life of the tool and reducing the failure of the tool chipping. risk. The “tip treatment†guarantees the safety of the tool tip position. "Double spiral groove design" When the tool is full groove cutting, the lower spiral groove ensures that the knife has enough chip space. Under the same groove depth, the tool is safer and it is not easy to block the iron chip due to insufficient chip space. In the flutes, the final tool is broken; at the same safe depth of cut, the tool with double helix groove can feed faster, which results in higher efficiency and 50% more efficiency than similar products. Or higher.
The easy-maintained PU material is soft to wrap the whole tape measure inside, protecting it from dirt and impact. The PU cover can also be customized by the color and stamped with your company logo. Too maintain consistency of design, the tape puller is seamed with the same PU material. As to the fiberglass tape, it bears two different measuring units on the different side, among which, one side measures in inch and the other in centimeter. The reinforced vinyl tape features high flexibility which allows itself to measure both flat and curvy surfaces. Durable soft tape is waterproof and stain resistant, so it is easy to keep clean for clear measurement. The tape can be customized on the tape scale(cm/inch only or both), tape length(60inch/150cm normally), tape color and logo printing. User-friendly retractable feature enable simple storage and effortless retraction.
Features
About Material
The tape measure is made of ABS case coated in PU leatheror real leather, PVC coated fiberglass. All the materials are eco-friendly, which pass ROHS and EN-71 tests. The lead content is less than 5ppm.
Case colors can be customized according to pantone code.
About Custom Logo
About Tape Colors
Standard tape colors are in white and black
About Tapeline Size
The standard length is 150cm/60inch and 100cm/40inches
Tape width is 7.5mm.
Pu Tailor Clothing Tape Measure, Custom Pu Tape Measure, Cheap Tape Measure, PU Tape Measure, Promotional Gift Wintape Measuring Tape Company , https://www.wintapetape.com
Efficient tool management solutions solve user cost escalation problems anytime, anywhere
From the point of view of high-efficiency milling applications, Fraisa's “tool specialist†cutting software can be regarded as a professional software for the industry's end mills. The software database is based on tens of thousands of processed raw materials, actually passed the Swiss Fraisa “tool schoolâ€. Trial cut, and finally show all the cutting parameters recommended in the customer software. The software can be selected from the original tool according to the needs of the customer's process, to select the same raw materials as the customer's processing, and finally recommend the customer's processing strategy and processing parameters, which can be described as a one-stop solution tailored for the customer's application. For high-efficiency milling of HPC tools, the software is recommended for different applications, rough or finishing, side milling or slotting, flat bottom, rounded or ball end mills, tool size and customer processing constraints. parameter.
High-speed cutting HSC (High Speed ​​Cutting) is more used in the field of precision and super-finishing in the mold field, Fraisa's "knife expert" cutting software Sphero-XR/XF series ball knives, and XSpeed ​​series round nose knives in the mold processing The field has long been well known, especially in the field of processing applications for hard steel. Tool bar material is the most suitable material for hard steel processing. Even if the material has a Vickers hardness of 50HV and the Co content differs by less than 1%, Fraisa divides it into two different applications. The harder material is used for finishing. As well as super finishing, the tool speed is faster and the surface quality is better. The higher Co content is used for roughing and semi-finishing, and the toughness is better at relatively large cutting amounts, and it is not easy to chip under the premise of maintaining high speed. For coatings, the X-Al coating is the most wear resistant and is best suited for use at high processing temperatures. Coating thickness, wear resistance coefficient, maximum processing temperature, adhesion, etc. are the most important elements of tool coating. The requirements for high speed machining/die finishing are higher. X-Al coating is used. To the perfect combination. Another important factor in high-speed machining/mold finishing is accuracy.
In the application of high-speed milling, you can also find the answer in the “Tool Expert†software. According to different materials, you can also find the grade of the raw material mold steel supplier. According to the hardness of the material after heat treatment, choose the side wall, slope, plane or It is a 3D surface machining, and finally the corresponding fraisa tool recommendation parameters are obtained.
About Case Color
For 1-2colors logo, we will use silk printing
For full color logo, we will print it with heat transfer printing ,
And we also make normal sticker or epoxy plate logo sticker for single color or full color logo
For PU or real leather tape measure, we can make emboss logo
We can make pink, green or other colors.
Full color design is available too.
We have longer one in length of 180cm/72inch and 200cm/79inch, and the maximum length is 214cm.