1, stuck Check whether the buoy or float of the inlet valve is stuck. You can pull the float (float ball) up and down by hand. Generally, it can move up and down smoothly. 2. Foreign objects Check that there may be foreign matter inside the inlet valve, resulting in the needle valve pressure chamber at the top of the inlet valve can not be formed and can not stop the water. In this case, for the average user, it is very difficult to repair it alone. Professionals repair or purchase replacement. 3, buoy Check what the buoyancy of the inlet valve is stuck or interfere with. Normally, the float is free to move up and down. You can check it. 4, damaged Check the water inlet valve inside the problem, such as the water inlet valve body into the sand or small debris, like this problem, can only buy one to change, more difficult to maintain. 1, close the inlet angle valve Take out the water stop flap of the falling part and check if it is deformed, aged or there is adhesion of foreign matter; clean or replace the water stop flap. 2, close the inlet angle valve Use a Phillips Screwdriver to remove the broken shaped nut; replace the new shaped nut and tighten the cable (the overflow pipe should be flattened when placed in the ceramic mounting hole. Do not twist tightly when shaken); 3, close the inlet angle valve Put the water in the water tank below the water outlet; after adding the dark solution in the remaining water, observe whether there is any water leakage at the flushing port. Yes, it is confirmed that the porcelain body is cracked; if not, the triangle valve is slowly opened. Place the water on the top of the water outlet and above the flap of water stoppage. Check for leaks at the same time when entering the water. When the water is placed on the level of the body's lip, if the water on the lip surface is detected, the body is confirmed to be cracked. 4, regular cleaning Regular cleaning of the inlet valve can also reduce the occurrence of more than water. Remove the water inlet pipe from the bottom left of the toilet bowl, and then remove the plastic nut at the bottom of the inlet valve. If there is anything like a filter, please remove it together. Then you can take the inlet valve out of the tank. Remove the fill valve of the inlet valve (usually at the top, a plastic hose, the overflow pipe connected to the drain valve), take up the plastic cover, loosen the floater connecting rod, then use the opposite direction up and down to force it to open. Now, it's time to take out the inside of the thimble pad and clean it and reinstall it. Step 1: Remove the blue integrated inlet valve on the left. (If it is a problem with the inlet valve) Step 2: Remove the cap from the inlet valve. Step 3: Remove the part of the white linking point above the attached accompaniment, as illustrated. Step 4: Separate the two parts, remove it and turn it counterclockwise, with the help of small pliers. It is installed clockwise, and it can be installed by pressing it. Step 5: This part of the plumbing is the key. Step 6: The following part can be re-detached. However, it is here that the water is closed. Several books can be repaired by placing the transparent cover on the top. After installing it and going back to try it out, use the shower head of the bathroom and remove it and install it on the bottom of the inlet valve. Step 7: Turn on the shower switch and fill the water. Step 8: Put on the floater. The water will stop and it will be repaired. Summary: We must determine the problem of this stop valve, the same problem can be so repaired. About the toilet water inlet valve is not limited to the specific maintenance methods Xiaobian introduced here. For more information, you can follow this site information. Toilet 3-Way Screwdriver,Magnetic Bits Screwdriver,Phillips Screw Driver,Precision Hand Tools Yucheng Weisite Measuring Tools Co., Ltd , https://www.wsttool.com
People's life is to eat and drink lasa, sleep, rough and not rough. Since "Lassa" is needed, as a civilized society, toilets must be available. The toilet is standard in the bathroom. The frequency of use is very high every day. It will be a long time for some problems. For example, the toilet inlet valve is not water. When this happens, many people feel troubled and do not know how to solve it. The following Xiao Bian tells everyone how to solve the reason why the toilet inlet valve is not water .