Metal Waste Incinerators,Galvanized Waste Incinerator,Black Waste Incinerators,Waste Incinerator Incinerator xiacun factory , https://www.xiacunmetal.com
It is the best way to prolong the service life of the pump, so how to maintain and maintain the gear pump? With this in the gear pump work or idle time, to do its maintenance and maintenance work, Next, Xiao Bian introduced to you some of the gear pump maintenance and care methods, as follows: Gear pump maintenance and care 1, often fat, gear pump for high-speed operation, the grease is easy to volatile, it must be bearing The lubrication can be kept clean, and pay attention to change. 2, gear pump often check and repair, gear pump should always check and repair, to check the power cord: the internal wiring, plugs, switches are good, the insulation resistance is normal, the tailstock is loose, commutator and brush in good contact , Armature-level expansion of the stator winding is a proper way to break the phenomenon of bearing and rotating parts are damaged and so on. 3, save each part and exchange the same parts, the demolition of the gear pump, you should save each part, pay special attention to explosion-proof parts of the explosion-proof surface can not damage the hairline, including insulation pads and casing, if any Damaged, you must replace the same new parts, shall not use less than the performance of alternative raw materials or parts of the original specifications do not match, all parts should be assembled according to the original location, can not be omitted. 4, gear pump pay attention to insulation resistance, long-term shelved or used in humid environments gear pump must be measured before use 500 V ohm meter winding insulation resistance. If the insulation resistance between the winding and the motor housing is less than 7 megohms, the winding must be dried. 5, pay attention to save the gear pump should be placed in dry, clean and non-corrosive gas environment. The above is the gear pump maintenance and care methods, I hope this content can be helpful to everyone. Expand to read: China Construction Water Exhibition Pump Valve Pipe Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: // beng.liuti.cn/ (service hotline:)