Barbed Wire,Barbed Wire Fencing,Barbed Wire Fence,Barbless Wire Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.hdpvcwire.com
2. Do not remove the electrical components on the panel to avoid affecting the airtightness of the cabinet.
Explosion-Proof Distribution Box Electrical Installation (I) Electrical Installation Precautions 1. This product must be operated by a professional electrician.
2. The user presses the technical documents such as the electrical system diagram, wiring diagram, and terminal list provided by our company and combines the actual conditions of the products to perform wiring one by one.
3. When wiring, please pay attention to the sealing performance of all the in and out cables (forbidden to discard the sealing ring in the pass), and depending on the degree of tightness of each cable, use explosion-proof cement for proper sealing.
4. After the user's wiring and debugging are completed, when the doors are closed, their sealing performance must be guaranteed.
5. The box must be grounded to the special grounding screw as required.
Explosion-proof distribution box wiring Step 1. Introduce the power cable from the customer distribution network.
2. Connect the power leads to the corresponding (ie, L1, L2, L3, N, PE) terminals according to the markings on the terminals. (Note: After the incoming cable enters the clamping joint, it must be sealed with mastic.) After the cable is connected, cover the cover as required.
3, after all the power line connection is completed, the product can be debugged
Installation of Explosion-Proof Distribution Box User Components 1. Since the components of the internal assembly electrical system are adjusted by the user, the user must set and debug in the safety zone.