With the improvement of people's living standards, water heaters have already entered more and more households. How can electric water heaters be used safely? What is the working principle of electric water heaters? In this issue, Xiao Bian introduced the use of electric water heaters in detail to you. Electric water heaters are heated and unheated by turning on and off the thermostat. The general concept of heat preservation is short-term heating. When heating, the rated power of the water heater is still used. After the circuit is turned on, if the water temperature is lower than 50°C (the critical temperature set by most brands), the thermostat is automatically turned on and the water heater starts heating. The water temperature reaches the preset temperature of the water heater (most brands are 75°C～85°C When the thermostat is disconnected, the heater stops heating. The so-called heat preservation is completed by the insulation layer of the water heater. With the water temperature falling from time to time, until the temperature is lower than 50° C., the water heater starts heating again. This cycle, complete the so-called insulation. When the lamp is warmed, the water heater does not consume electricity, and it is close to the theoretical zero power and zero power consumption. When heating, the water heater uses the rated power. To understand the uniform power consumption of the water heater insulation, look at the national standards can be. The approximate figure is that even if a drop of hot water is not used, the power consumption of the water heater is only about 2 degrees/24 hours. Water Heater Water Heater Buy Water Heater Brand Electric Water Heater Building Model,Architectural Model Making,Model Ship Building,Model Making Nanjing Great Century Art Model Co., Ltd. , , https://www.dsjysmx.com First, the working principle of electric water heater 
1 23 Next> Total 3 Pages
Page to page