Bathtub is an indispensable bathroom product in our bathroom renovation. It not only allows us to release fatigue, but also plays a good decorative effect. There are many brands of bathtubs on the market. What are the bathtub materials ? We will come to specific inquiry and inquiry today.

Bathtub material 1, Acrylic bathtub

Made of man-made organic materials, it is characterized by rich shapes, light weight, good surface finish, and low price, but due to the existence of poor high temperature resistance, poor pressure resistance, non-abrasiveness, and the disadvantage of aging of the surface due to the artificial organic material, Acrylic Bathtubs that use bath tubs for more than three years are rarely discolored. The advantages are cheap, good insulation, the disadvantage is easy to change color, another drawback is that it is easy to hang dirt, not clean. There is a lot of noise when the water is released.

Bathtub material 2, wooden bathtub

Such solid wood bathtubs are often very heat-insulating and the cylinders are relatively deep and can fully infiltrate the body. Wooden bathtubs are generally made of hard wood and high density wood, and cedar wood is currently the most common in the market. Solid wood bathtub can give people a fresh feeling, and the solid wood of the bathtub is easy to clean, natural environmental protection, the disadvantage is that the price is slightly higher, the need for maintenance, or deformation will leak. The daily maintenance of the wooden bathtub is also very simple. The solid wooden bathtub is wet and dry, and it is often immersed in clean water to avoid exposure.

Bathtub material 3, ceramic bathtub

Ceramic bathtubs are made of ceramics, so bulky, manure, and fragile features have gradually been replaced by acrylics, iron-cast bathtubs, and steel bath tubs, and have been phased out.

Bathtub material 4, cast iron cylinder

Made of cast iron, the surface covered with enamel, so the weight is very large, it is not easy to produce noise when used; due to the more complex casting process, so the cast iron cylinder is generally a relatively single shape and the price is very expensive. Because the cast iron cylinder is heavy, it is not easy to move and carry, so the installation process is very troublesome, often requires lifting, and it is difficult to move and repair after installation, and the ordinary consumers buy less. However, due to the thick wall of the cylinder, the cast iron cylinder is characterized by its excellent insulation properties. Not easy to hang dirt, easy to clean, good insulation; but the highest price. There is little noise when the water is released.

Bathtub material 5, steel bathtub

The traditional material for the manufacture of bathtubs is made by stamping a bathtub-specific steel plate with a thickness of approximately 2 mm, and the surface is then treated with an enameling treatment. It is characterized by wear resistance, heat resistance, pressure resistance, and weight. Between the cast iron cylinder and the acrylic cylinder, the insulation effect is lower than the cast iron cylinder, but the service life is long, and the overall cost performance is higher. This cylinder is enamel surface, not hydrophilic and oil, so the surface finish and hardness is very high, very wear-resistant scratch resistance, and is not easy to adhere dirt, very easy to clean. The price is centered, it is not easy to hang dirt, easy to clean, not easy to fade, lasting gloss. But the insulation is not good. Noise is centered when the water is released.

The above is a general introduction of the bathtub material , I hope to help you, more exciting decoration information, all in this site, so stay tuned.

More articles:

When Philippine special bathroom recommended Philippine special bathroom

Shower room brand line shower room which brand is good

Wrigley bathroom cabinet recommended Wrigley bathroom cabinet please

Bath barrel what material bathroom products to buy

Bathtub

DC Axial Fan 80x80x25

Dc Axial Fan 80X80X25,Dc Mini Cooling Fan,Dc Axial Fan Cooling,Directly Axial Mini Cooling Fan

Crown Electronics CO., LTD , https://www.crownelectronicstw.com