In general, the current wooden finished bathroom furniture takes into account the problem of water repellency, and the use of a moisture barrier is not particularly worrying. However, when selecting, it is best to observe the details of the back of the cabinet. It is best to choose a back panel with double decorative veneers. This can avoid the density of the cabinet and the tile fittings are very close, the water vapor will be It will not easily enter the board from the back of the cabinet, resulting in deformation, mildew and the like. After bathing, the water vapor in the bathroom is large. In order to remove water vapor, doors and windows are usually opened to allow air to circulate, or a ventilation fan is opened to reduce the humidity of the entire space. But everyone often overlooks the tile of the bathroom wall is the most culprit for the furniture to get wet. So when you see a favorite bathroom cabinet, it is best to confirm that the backboard has a veneer, preferably a double-layer veneer, which can greatly extend the life of the furniture. In addition, when using the multi-functional edge banding strips as much as possible, it can tightly wrap the edge of the board to cut off the surface, which is better for waterproofing and moisture-proof. There are many people who have problems with the bathroom cabinets. They start to deform from the bottom plate below the pool. The main reason is that the condensation water left by the water pipes hidden in the cabinet soaks the furniture at the bottom of the cabinet, so it is best to wipe them with a dry rag. Look at the underside of the bathroom cabinet. Laser Cut Sheet,Laser Thin Kerf Saw Blade,Laser Cut Saw Blades,Diamond Laser Saw Hengshi Diamond Tools CO.,LTD , https://www.ryomaltools.com