Made of medical grade polypropylene, resistant to alcohols and other mild organic solvents. 96 Deep Well Plate 2 ml,2.2 ml Deep Well Plate,2ml 96 Well Plate,96 Square Well Plate,96 Deep Well Block Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuetube.com
Can provide sterilization, with lid, independent packaging.
Provide 10ml, 4.6ml, 3.5ml, 2.2ml, 1.6ml, 1.0ml, 1.2ml, 0.5ml, Deep-Well Plate and 96 Deep Well Plate.
It can be sealed with a Sealing Film or a silicone cover.
It complies with the international SBS automation standard and is compatible with the international standard DNA to provide equipment.
The magnetic tip comb, which is usually used along with deep well plate, can be divided into 96 magnetic tip comb and 8 Row magnetic tip comb. Both of the comb tips has different dimension to match the different size of the plate well.
Pump (Diaphragm metering pump) operation and maintenance: (A) drive: 1, hand pressure compensation before driving the valve stem, this time, one side of the membrane cavity filled with oil, one side of the gas discharge chamber, until the bubble No longer upstairs. 2, after driving, the pump plunger for inhalation movement (no pressure in the discharge tube) The above method will be compensated valve stem pressure to open several times the safety valve to jump open, so that the safety valve at the air discharge until the bubble discharge until. 3, at this time if the impact of sound or vibration phenomenon, indicating excessive fuel, should be in the plunger for the discharge stroke, the light pressure compensation valve stem for short-term drainage, so that the extra discharge until the vibration or shock After the sound is removed, the pump runs smoothly. (B) stop: cut off the power, stop the pump running. Close the import and export pipeline valves, shells should pay attention to open before driving. (C) Maintenance: 1, lubricating oil replacement: January to replace the oil, adding qualified amount of 23 # or 30 # mechanical oil. Pump in operation, the main part of the temperature provisions: the motor allows the maximum temperature of 70 ℃; adjust the base oil temperature not exceeding 65 ℃; filler and the temperature does not exceed 70 ℃. 2, the leakage loss: pump in normal operation, the leakage shall not exceed 15 drops per minute, 2), 3) in the event of excessive, should contact the relevant units for processing to eliminate hidden dangers.