Flexible lift gate is a flexible soft curtain door, inside and outside the two curtains, curtains used between the aluminum beams connected with a vertically movable rail, the roof beams have levels not in the same straight line and hangar large plants in particular be applicable. Flexible lift door installation does not take up interior space in the hole inside. When the fiest move to open the door, and finally superimposed over the hole. Off event curtain rail first and then fall down until it is completely closed. Flexible Gate,Flexible Pvc Aircraft Folding Up Door,Steel Structure Fabric Flexiile Door,Exterior Automatic Flexible Door Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.selfrepairinghighspeeddoor.com
In April 2010, the output growth rate of CNC machine tools in China further increased. The operating data of the machine tool industry shows that the output growth rate of CNC machine tools reached 66% in April, higher than the 62% level in March, and the industry growth rate further improved. From the absolute value of production, the output of data machine tools reached 17,000 units in April, up from 15,000 units in March, indicating that the demand for machine tools is constantly increasing.
The numerical control rate has declined slightly. In April, with the continuous expansion of the output of CNC machine tools, the numerical control rate of China's machine tool industry continued to rise. In April, the numerical control rate of China's machine tool industry was 27.5%, a slight decrease of 0.5% compared with March, and still maintained a high level. . However, compared with the level of about 70% in developed countries, there is still room for improvement.
The downstream drivers are still strong. In April, China's automobile production reached 1.6 million, which was lower than that in March, but it still maintained a high level. Recently, major auto manufacturers have expanded their production capacity, which lays a solid foundation for the improvement of the machine tool industry.
The main raw materials are operated at low levels. Taking steel as an example, since China's steel price reached a high point in July 2008, it continued to operate at a low level in 2009. After entering 2010, steel prices remained at a lower price, which greatly expanded the profitability of the machine tool industry.
Abstract: In April 2010, the output growth rate of CNC machine tools in China further increased. The output growth rate of CNC machine tools reached 66%, higher than the 62% level in March, and the industry growth rate further increased. With the continuous expansion of the output of CNC machine tools, the numerical control rate of China's machine tool industry continues to climb. In April, the numerical control rate of China's machine tool industry was 27.5%, a slight decrease of 0.5% compared with March, and still maintained a high level.