Cree LED Grow Light can save about 30% cost in the application,mainly lie in LED package cost,light engine production costs and the secondary light distributioncosts, which is great significance for applications and promotion of semiconductor lighting. We could also DIY the led ratio(wavelength ratio) which imitate the natural sun spectrum to help your plants grow in a very natural type of atmosphere, Absolutely, we are the very original and professional OEM/ODM factory, our Cree LED Grow Light have the great cost performance with the new integration technology being used for mass production, partners around the world keep telling us how amazed at the increase in output and the decrease in the energy bill.
Applications
Our professional full spectrum Cree LED grow light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Key Features
Plug with listed certificate safe to use.
Item Display
The Plug you can choose
Full Spectrum Cree LED Grow Light PAR Value
Our Ageing Test
Package
Warnings:
1.lndoor use only.
2.To avoid being damaged,do not use water or drip irrigation while using.
3.Sunshine lighting time should be 12-18 hours.
4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,low height will cause the destruction of plants.
5.Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hung too high.
6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp.
Warmly welcome to Visit our Factrory when you come to China.
CREE Chips LED Grow Light,CREE LED Grow Light,CREE Grow Light,CREE COB LED Grow Light Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlighting.com
First, the application of the device and the amount of drug can be used Harvester-5 or Harvest-10 type hand powder sprayer, the required wind speed of the nozzle is more than 8 meters per second. The harvesting speed of the Harvest Hand-5 type hand crank should reach 36 rpm, and the Harvest-10 type should reach 50 rpm. The purpose is to produce a strong enough wind to make the powder evenly discharged. The amount of powder discharged is adjusted to be about 200 grams per minute. Generally, 1 kg of dust is used per acre, and it takes only 5 minutes to process 1 mu of greenhouse.
Second, the preparation of the shed before the dusting Before the dusting, the vents and doors of the shed are closed, and the shed is covered with a plastic film to ensure a closed state. If the plastic film has small pieces, the dust has no effect.
3. Powder spraying time The best time for dusting is morning or evening. The cockroach has not been uncovered or just closed, so the deposition rate of the powder on the crop is higher. Noon should be avoided at noon on sunny days, and powder can be sprayed at any time on cloudy days. Ventilation can be turned on two hours after dusting. Spray once every 7 to 10 days according to the condition.
4. Spraying method greenhouse: adopting the horizontal spraying method of retreat, that is, starting from the inner end of the greenhouse, the operator stands on the aisle, facing away from the north wall of the greenhouse, facing the south side, while spraying on the air, while retreating, until exiting the doorway ,Close the door. If there is any remaining medicine, the powder spray pipe can be inserted into the room from the upper air outlet to spray, until the remaining powder is sprayed. Greenhouse: The left and right air swinging method is adopted. From the north end, the operator stands on the aisle and swings the powder pipe to spray powder on the left and right sides. While spraying, it retreats until it exits the door of the south end and closes the door. Medium and small arch shed: The shed is sprayed, that is, the shed is uncovered on the side of the shed or on different sides of the shed, and the powder spray pipe is inserted into the shed for spraying, and the nozzle swings left and right.
5. Dust-spraying points and precautions When spraying, the powder must be sprayed evenly into the space of the booth. It is not advisable to spray the powder-spraying tube to the plant line by line, otherwise the deposition will be uneven. The operation should be in accordance with the pesticide safety operation rules. It is required to wear long-sleeved overalls, goggles, masks and protective caps. The hands and other exposed skin must be cleaned after work.
Author: Ma Jingtao
Source: Henan Science and Technology News
Due to its special environmental conditions, the disease of the greenhouse in the winter and spring seasons is serious. The use of spray method is time-consuming and labor-intensive, and it increases the humidity of the greenhouse. The dust-based method is time-saving, labor-saving and high-efficiency. Significant benefits and other characteristics.
ã€Comment】 ã€Print this article】 ã€Close this page】 ã€Large, medium and small】
Upgraded Epistar chips,High Lumen,High penetration.
Zener Diode protection Each LED,one LED Out,other LEDs still work.
High quality material,Listed Certification Wires,Heatproof Tube,Zero-Risk to catch fire.
Efficient Full spectrum Special rations of Blue,Red and White for both blooming &fruiting stages.
Adopting isolated power supply,safe&easy to maintain&long life time.
Aluminum heat-conducting plate+high quality brand fans,efficient heat dissipation.
IR LED involved,it is not as bright as other leds,But promote the yield.